Aluminum Base Copper Clad Laminate_Wise Industry Co., Limited (DongGuan LIJI Electronic Material CO.,LTD)

1. COMPANY IDENTIFICATION

Company’s Name: DONGGUAN LIJI ELECTRONIC MATERIAL CO.,LTD.

Company’s Address: JIANSHA ZHOU IND ZONE WANJIANG DISTRICT DONGGUAN GUANGDONG CHINA

Company Tel: +86-0769-87076013 Fax: +86-0769-87076017

2. Base

Aluminum base copper clad laminate have excellent flame retardant,high mechanical strength,dimensional stability etc. Especially it has very good heat sink,electromagnetic shielding and solder float.

It's widely used for the modifier and sparker on fire for motorcycle and mobile ,power LED,sound box power supply module and acoustics shielding system etc.

MCPCB Use in the high efficiency led lamp, PAR lamp and so on .

3 Capability

1: Layer:1-16

2: Board finished thickness:0.20mm-6.0mm

3: Material:FR-4,CEM-1 .CEM-3. High TG,FR4 Halogen Free. Rogers, aluminum based

4: Max .finished board size:39.4inch*47inch (1000mm*1200mm) Min. drilled hole size:10mil (0.25mm) Min. Line width:3.5mil (0.089mm) Min. Line spacing:3.5mil (0.089mm)

5: Surface finish treatment:HASL/HASL Lead free , HAL chemical tin, chemical gold, immersion silver/gold, osp, gold plating

6: Copper thickness:0.5-5.0 OZ

7: Solder mask color: green/yellow/black/whiter/blue/red

8: Copper thickness in hole:25.0 um(1mil)

9: Inner packing: Vacuum packing/Plastic bag Outer packing: Standard carton packing

10: Shape tolerance: ± 0.13mm Hole tolerance: PTH: ± 0.076mm NPTH: ± 0.05mm

11: Impedance control: ± 10%

12: Certificate: UL, ISO 9001. ISO 14001, SGS, ROHS

13: Special requirements: Buried and blind vias+controlled impedance+BGA

14: Profiling: Punching. Routing. V-CUT . Beveling

15: Provides OEM services to all sorts of printed circuit board assembly as well as electronic encased products

4 Description

Characteristics: High heat sinking, electromagnetic shielding, and high mechanical properties, good processing performance.

Usage: Power Admixture IC (HIC).
1. Audio Equipment: Input and output amplifier, balanced amplifier, audio amplifier; Pre-amplifier and Power amplifiers ect;
2. Power Equipment: Switching regulator `DC / AC converter and SW regulator ect;
3. Telecommunications electronic equipment: High-frequency electrical filter, increases device and transmitter circuit;
4. Office automative equipment: Elector motor drive and so on;
5. Cars: Electronic regulator. Electronic Igniter and power controller;
6. The computer: CPU board. Floppy disk drive devices and power installation;
7. Power Modules: Converter and power rectifier bridges.

5 Properties

项目 Item	试验条件 Test Condition	LJ-AC-N-1		LJ-AC-T-1
项目 Item	试验条件 Test Condition	指标值	试验值	指标值	试验值
剥离强度最小值（N/mm） Peel Strength min	A	≥1.8	2.0	≥1.8	2.0
剥离强度最小值（N/mm） Peel Strength min	热应力后 After thermal stress	≥1.8	1.8	≥1.8	1.8
热冲击后起泡试验 Blister test After Thermal stress	A	260℃2min 不分层不起泡 No delaminating	OK	280℃2min 不分层不起泡 No delaminating	OK
热冲击后起泡试验 Blister test After Thermal stress	热冲击后 After thermal impact	260℃2min 不分层不起泡 No delaminating	OK	280℃2min 不分层不起泡 No delaminating	OK
燃烧性 Flammability	A	FV-O	FV-O	FV-O	FV-O
热阻最大值（℃/W） Thermal resistance max	A	≤2.0	0.8	≤1.5	0.8
表面电阻率最小值（MΩ） Surface Resistivity min	A	≥1×10⁵	5×10⁷	≥2×10⁵	2×10⁸
表面电阻率最小值（MΩ） Surface Resistivity min	恒定湿热处理 Constant humidity treatment (90%,35℃,96h)	≥1×10⁵	2×10⁶	≥2×10⁵	1×10⁷
体积电阻率最小值min(MΩ·m) Volume Resistivity	A	≥1×10⁶	4×10⁸	≥2×10⁶	4×10⁸
体积电阻率最小值min(MΩ·m) Volume Resistivity	(90%,35℃,96h)	≥1×10⁶	5×10⁷	≥2×10⁶	3×10⁸
击穿电压最小值（Kv）min Dielectric Breakdown	A	≥2.0	5.5	≥2.2	8.3
介电常数最大值（1MHz） Dielectric constant At 1MHz max	（40℃，90%，96h）	≤4.4	4.2	≤4.4	4.3
介质损耗因素最大值（1MHz） Dielectric dissipation factor	（40℃，90%，96h）	≤0.03	0.02	≤0.03	0.02

6 About

We produce high-power LED kinds of high thermal conductivity aluminum plates, plug-and-aluminum plate, single-sided, FPC, FR-4, multi-layer circuit boards, With advanced foreign products, comparable products are widely used in lighting, communications, electronics, machinery, such as cooling demand in the field of industry. At the same time, the company also specializing in the production of our own intellectual property rights of engaging in a variety of high-performance thermal conductivity of aluminum / copper-based CCL.

Supply the high quality pcb , single-sided, double-sided, multilayer pcb.

If you have any questions, do not hesitate to contact with us.

7 Sample Pictures

AluminumCCL/Flexible_aluminum_Copper_Clad_Laminate(CCL)

Aluminum Copper Clad Laminate Flexible Aluminum CCL

AluminumCCL/Metal_Core_Printed_Circuit Board(MCPCB)

AluminumCCL/Metal_Core_Printed_Circuit Board_PCB(MCPCB).

Aluminum PCB (MCPCB) Metal_Core_Printed_Circuit Board